MaxX 6A
Processed Active Monitor 700+200W

• Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• Custom horn, handled and stand adapter built into the structure
• It can be used in all audio-professional amplification systems
• Profile for use as a stage monitor
• Four anchoring points (M10) for wall and ceiling installation
• Full access to controls in all conditions of use
• 2-way bi-amplification system:
• woofer with power stage of 700W rms with PWM “Pulse Width Modulation” technology
• driver/horn with power stage of 200W rms in class G
• 380 mm custom B&C speaker with 75 mm coil with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• Compression driver with 65 mm coil and 36 mm shaft
• ADAP® (Advanced Dynamic Active Protection) processor for total transducer protection and optimized acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
• Active electronic filter 24 dB/oct
• Control panel highly professional with XLR/Jack Neutrik™, input XLR Neutrik™ Link, Gain plus 3-band equalizer (High- Mid-Low), Volume

MaxX 6
Sound Reinforcement Monitor 700W

• Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• Custom horn, handled and stand adapter built into the structure
• It can be used in all audio-professional amplification systems
• Profile for use as a stage monitor
• Four anchoring points (M10) for wall and ceiling installation
• Full access to controls in all conditions of use
• 2-way 4 or 8 ohm avaulable
• 380 mm custom B&C speaker with 75 mm coil with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• Compression driver with 65 mm coil and 36 mm shaft
• Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• Drivers protected against overload and acoustic feedback
• Flat frequency response over the entire dispersion angle
• Recommended amplifier 700W
• SPL 126.5/129.5 dB
• Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links

MaxX 5A
Processed Active Monitor 400+100W

• Extremely light and sturdy enclosure made of polypropylene with gas injection moulding.
• Custom horn, handled and stand adapter built into the structure
• It can be used in all audio-professional amplification systems
• Profile for use as a stage monitor
• Four anchoring points (M10) for wall and ceiling installation
• Full access to controls in all conditions of use
• 2-way bi-amplification system:
• woofer with power stage of 400W rms with PWM “Pulse Width Modulation” technology
• driver/horn with power stage of 100W rms in class G ultra-light and ultra powerful.
• 15” custom B&C woofer with neodymium magnet ultra-light and ultra-powerful. Die-cast aluminium basket
• Compression driver with 36 mm coil and 25 mm shaft
• ADAP (r) (Advanced Dynamic Active Protection) processor for total transducer protection and optimized acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
• Active electronic filter 24 dB/oct
• Control panel highly professional with XLR/Jack Neutrik(r) input XLR Neutrik(r) Link Gain 3-band equalizer (High-Mid-Low) Volume

MaxX 5
Sound Reinforcement Monitor 400W

• Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• Custom horn, handled and stand adapter built into the structure
• It can be used in all audio-professional amplification systems
• Profile for use as a stage monitor
• Four anchoring points (M10) for wall and ceiling installation
• Full access to controls in all conditions of use
• 2-way 4 or 8 ohm avalilable
• 380 mm custom B&C speaker with 64 mm coil with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• Compression driver with 25 mm coil and 36 mm shaft
• Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• Drivers protected against overload and acoustic feedback
• Flat frequency response over the entire dispersion angle
• Recommended amplifier 400W
• SPL 124/127 dB
• Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links

MaxX 4A
Processed Active Monitor 300+100W

• Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• Custom horn, handled and stand adapter built into the structure
• It can be used in all audio-professional amplification systems
• Asymmetric profile for use as a stage monitor
• Four anchoring points (M10) for wall and ceiling installation
• Provided with adapters to stack the enclosures
• Full access to controls in all conditions of use
• 2-way bi-amplification system:
• woofer with power stage of 300W rms with PWM “Pulse Width Modulation” technology,
• driver/horn with power stage of 100W rms in class AB
• 320 mm custom B&C speaker with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• 1” compression driver
• ADAP ® (Advanced Dynamic Active Protection) processor for total transducer protection and  optimizing acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
• Active electronic filter (24 dB/oct.)
• Highly professional control panel with XLR/Jack Neutrik TM, input – XLR Neutrik TM, Link - Gain plus Mic/Line selector, 3-band equalizer (High-Mid-Low), Volume

MaxX 4
Sound Reinforcement Monitor 300W

• Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• Custom horn, handled and stand adapter built into the structure
• It can be used in all audio-professional amplification systems
• Asymmetric profile for use as a stage monitor
• Four anchoring points (M10) for wall and ceiling installation
• Provided with adapters to stack the enclosures
• Full access to controls in all conditions of use
• 2-way 4 or 8 ohm available
• 320 mm custom B&C speaker with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• 1” compression driver
• Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• Drivers protected against overload and acoustic feedback
• Flat frequency response over the entire dispersion angle
• Recommended amplifier 300W
• SPL 123/126 dB
• Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links

MaxX 2A
Processed Active Monitor 200+50W

• Extremely light and sturdy enclosure made of polypropylene with gas injection moulding.
• Custom horn, handled and stand adapter built into the structure
• It can be used in all audio-professional amplification systems
• Profile for use as a stage monitor
• Four anchoring points (M10) for wall and ceiling installation
• Full access to controls in all conditions of use
• 2-way bi-amplification system:
• woofer with power stage of 200W rms with AB class
• driver/horn with power stage of 50W rms AB class
• 10” custom B&C woofer with neodymium magnet ultra-light and ultra-powerful. Die-cast aluminium basket
• 1” Compression driver
• ADAP (r) (Advanced Dynamic Active Protection) processor for total transducer protection and optimized acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
• Active electronic filter 24 dB/oct
• Control panel highly professional with XLR/Jack Neutrik(r) input, XLR Neutrik(r) Link, Gain, 3-band equalizer (High-Mid-Low), Volume

MaxX 2
Sound Reinforcement Monitor 200W

• Extremely light and sturdy enclosure made of polypropylene with gas injection moulding.
• Custom horn, handled and stand adapter built into the structure
• It can be used in all audio-professional amplification systems
• Profile for use as a stage monitor
• Four anchoring points (M10) for wall and ceiling installation
• Full access to controls in all conditions of use
• 2-way 4 or 8 ohm available
• 10” custom B&C woofer with neodymium magnet ultra-light and ultra-powerful. Die-cast aluminium basket
• 1” Compression driver
• Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• Drivers protected against overload and acoustic feedback
• Flat frequency response over the entire dispersion angle
• Recommended amplifier 250W Ohm
• SPL 121/124 dB
• Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links

MaxX 9Sa
Processed Active Sub-Woofer 900W

• The lightweight, sturdy enclosure is made from shock-resistant polyethylene with rotomoulding
• Handles built into the structure
• Stand adapter
• It can be used in all audio-professional amplification systems to enhance the low frequencies
• Wall or ceiling installation available on request
• Sub-Woofer system with power stage of 900W rms, PWM “Pulse Width Modulation” technology making it possible to decrease the weight in the ratio 1:3, achieving a level of efficiency 3 times higher than that of conventional technology
• 380mm custom speaker with coil of 100mm with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• ADAP ® (Advanced Dynamic Active Protection)
• Control panel for right and left channels with: XLR/Jack Neutrik TM, input XLR Neutrik TM, Link, Filtered signal output (high-pass) for satellites, General volume

MaxX 9S
Sound Reinforcement Sub-Woofer 900W

• The lightweight, sturdy enclosure is made from shock-resistant polyethylene with rotomoulding
• Handles built into the structure
• Stand adapter
• It can be used in all audio-professional amplification systems to enhance the low frequencies
• Wall or ceiling installation available on request
• Sub-Woofer system with passive filter
• 380mm custom speaker with coil of 100mm with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• Drivers protected against overload and acoustic feedback
• Flat frequency response over the entire dispersion angle
• Recommended amplifier 700W
• SPL 126.5/128 dB
•  Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links